If the slag needs to be dried, special equipment must be used to complete it. It can be said that the slag dryer is indispensable, and some hot air will be emitted when it is used. If there is no hot air during the use process, it should attract our attention at this time. We need to see what causes it.
Failure of the hot air system
The hot air system of the slag dryer consists of a heater, a fan, and a temperature controller. Failure of any component may cause the hot air to not come out. To check whether the hot air system is operating normally, you can start from the following aspects:
1. Whether the heater is operating normally. If not, it needs to be replaced or repaired.
2. Check whether the fan blades are normal. If the blades are damaged or the fan is damaged, they need to be replaced or repaired.
3. Check whether the temperature controller is working properly. If the temperature controller is broken, the hot air temperature will be unstable or not work at all. It needs to be replaced or repaired.
Blockage of the filter After the slag dryer has been used for a period of time, a large amount of dust and debris will accumulate in the filter, causing blockage. Blockage of the filter will cause poor hot air flow and affect the drying effect. Therefore, after each use, the filter should be cleaned to avoid blockage.
Improper placement
If placed in a place without ventilation or air circulation, the hot air will not circulate normally. When placing, choose a location with air circulation to avoid blockage.
Power failure
Power problems can also cause no hot air. Check whether the socket is working properly. If the power supply is insufficient or the voltage is unstable, you need to check the power line and the machine electrical appliances. If the electrical appliances are damaged, you need to contact maintenance personnel.
2025-03-28
