How to deal with the heating problem of slag dryer bearings

Reasons for heating of slag dryer bearings:

1. Lack of lubricant during the use of the slag dryer will cause severe friction between the bearings during operation, and severe wear will cause heating and damage to the bearings;

2. The operating environment of the slag dryer is highly adaptable, so it can be used efficiently in different consumption environments. When nearby dust particles enter the bearing equipment, the bearings will be dirty. If the bearings are not cleaned for a long time, the material dust will accumulate, causing the slag dryer bearings to overheat.

Solutions for heating of slag dryer bearings:

1. In the use of the slag dryer, attention should be paid to regular maintenance and maintenance of the slag dryer, and lubricant should be added and cleaned according to the use cycle of the equipment to ensure the flexibility of the bearing operation.

2. When adding lubricants, attention should be paid to ensure the cleanliness of the lubricants, and the addition should be appropriate. Do not add too much at one time to cause lubricant overflow and pollute the bearings. When a lot of dust accumulates inside the bearing, the bearing should be disassembled and cleaned thoroughly in time to prevent excessive dust accumulation from clogging the bearing.