What are the main wearing parts of quartz sand dryer?

1. Bearings. Bearings are the parts in the dryer that bear a large load and are prone to wear during long-term operation. It is necessary to check the lubrication of the bearings regularly and replace the severely worn bearings in time.

2. Seals. The seals of the quartz sand dryer, such as gaskets and sealing rings, are prone to wear or aging due to long-term contact with materials. It is necessary to check the integrity of the seals regularly and replace the damaged seals in time.

3. Transmission parts. Such as chains, gears, etc., these parts will also be worn during the operation of the dryer. It is necessary to check the wear of these parts regularly and replace the severely worn parts in time.

Before replacing the wearing parts, you need to stop the dryer and disconnect the power supply, then check the equipment to determine the wearing parts that need to be replaced. Please use the correct tools to remove the old parts that need to be replaced, and pay attention to protect other parts from damage during disassembly. Please ensure that the wearing parts are correctly installed on the equipment and tightened firmly. After the installation is completed, restart the quartz sand dryer for debugging and operation to observe whether the equipment is operating normally and whether the newly installed wearing parts are working properly.