How to prevent the agglomeration of quartz sand in the quartz sand dryer during the drying process

1. Quartz sand pretreatment. Pre-treat the quartz sand properly before drying to reduce the tendency of agglomeration.

2. Evenly spread. Spread the quartz sand evenly in the dryer to avoid local over-density of the quartz sand during the drying process.

3. Appropriate humidity control. Control the humidity of the quartz sand to prevent agglomeration caused by excessive humidity.

4. Stir regularly. Stir regularly during the drying process of the quartz sand dryer to ensure that the quartz sand is heated evenly and reduce the possibility of agglomeration.

5. Use dispersant. Add an appropriate amount of dispersant to improve the interaction between quartz sand particles and reduce the probability of agglomeration.

6. Control wind speed. Appropriately adjust the wind speed of the quartz sand dryer to prevent the formation of a hard shell on the surface of the quartz sand, which makes it difficult to dry the inside.

7. Use anti-stick coating. Use anti-stick coating on the inner surface of the dryer to reduce the adhesion of quartz sand and reduce the risk of agglomeration.