Features of Kaolin Dryer

1. Kaolin dryer has strong overload resistance, large processing capacity, low fuel consumption and low drying cost;2. Kaolin dryer adopts downstream drying met

Which material of cylinder is more suitable for slag dryer?

1. Carbon steel. Low cost, good wear resistance, suitable for most regular working environments. However, for corrosive materials or environments, anti-corrosio

Requirements for the production of kaolin dryer cylinder

1. The center line of the kaolin dryer cylinder should be a straight line with a specified slope, and the error of this straightness should not exceed 2 mm.2. T

Slag dryer installation steps explained

1. Foundation preparation. Ensure that the installation location is flat and solid. Usually, it is necessary to pour a concrete foundation and ensure horizontal

How to prevent the aging of sand dryers?

Sand dryers usually use heat transfer methods to make the materials contact with high-temperature hot air, so as to evaporate the moisture of the materials, so

What are the methods to improve the internal structure of fly ash dryer?

Fly ash dryer usually adopts direct heating method, and the heat source can be coal, gas or electric heat. The equipment structure includes feed port, discharge

How to prevent agglomeration or wall sticking in slag dryer

1. Adjust the feed particle size. Ensure that the feed particle size is uniform. Too large particles may cause accumulation.2. Control the feed speed. Maintain

How to solve the problem of lining falling off in the cylinder of sand dryer

Sand dryer is mainly used to dry granular materials such as sand, river sand, quartz sand, etc. It uses hot air as the heat carrier, and the material inside the